Cold Chambers

Modular Cooling Chambers (Plus, Minus, Shock)

Cooling Chamber


Cold Chambers – Modular refrigeration chambers are intended for storing food products (milk, dairy products, fruits, vegetables, meat), frozen foods and for quickly freezing them.

The construction elements are:

– Angular PVC profiles and forks with polyurethane filling and angular curves on the inside.
– Polyurethane panels coated on both sides with galvanized plasticized sheet with a protective foil 0.6 mm thick (color RAL9002).
– Joints of the panels, as well as the panels and the angular profiles are carried out by locks cast into the panel. The connection is simple, thermally efficient and hygienically flawless.

We make panels in two thicknesses: 80 mm and 120 mm, for chamber volumes from 6.9m³ to approx. 150m³.
The smallest dimensions for cooling chambers are: 2000mm x 1500mm x 2300mm

Standard panel heights range from 1800mm to 3900mm (with 150mm module).

Standard panel widths range from 300mm to 1200mm (with 150mm module).

Wing door with hinges and lock, for standard openings width: 700mm, 800mm, 900mm and 1,000mm.

Minus chambers must have a panel floor.

Do you have a question about the product?

Cooling Chambers (Plus, Minus, Shock)

Rashladna Komora


Delivery and installation of equipment for cooling chambers in plus and minus mode.

Cold rooms (refrigerators) are widely used in all industries to maintain the freshness of products, for storage or for quick freezing.
We make them in the dimensions desired by the customer, which allows the chamber to be placed in almost any space.
They are built of thermal insulation polyurethane panels of the highest quality
The thicknesses of the insulation panels are: 80 and 120 mm
Cooling mode at customer’s request
Sanitary strips that cover panel joints are mounted inside the chambers.
Led Lighting inside the chamber.
Automatic mode control.

Minus chambers must have a panel floor.

Do you have a question about the product?

Additional information

Cooling chambers are constructed at the customer’s requests and in accordance with our production standards. Chambers can be manufactured as modular or one-piece (panel) chambers.

Cooling chambers are produced in three cooling modes:

– Plus mode (0 ° C to 8 ° C)
– Minus mode (-20 ° C to -10 ° C)
– Shock mode (-40 ° C to -30 ° C)

In accordance with the above-mentioned operating modes, we construct the cooling unit as well as all of the additional equipment needed for the smooth operation of the selected cooling chamber.

Additional equipment

  • Shelves
  • Side carriers